Feet Bath Spa Massager With Heat Manufacturers – Dual Sterilization Deep Massage Intelligent Foot Bath Massager – KASJ

1. Water and electricity separation.
2. Over-temperature protection: precise temperature control, control the water temperature to exceed 50 degrees, prevent overheating and cause burns.
3. Over-temperature power off: If the temperature is too high or dry burning occurs, the machine will automatically power off to prevent potential safety hazards.

Reasonable depth design allows us to soak our feet deeper, and can soak above the calf, bringing the ultimate foot soaking experience.

KASJ Z201 is designed with a detachable massage plate through the optimization of the structure, which solves the pain point that the massage plate cannot be disassembled and the foot bath cannot be thoroughly cleaned, so that our foot bath can be cleaned more thoroughly trouble.

KASJ has optimized the latest massage methods through continuous experiments, using Tai Chi dials to soften the skin on footsteps, and adding acupuncture massage to stimulate acupoints, making you enjoy a real full massage.

The latest circulating heating method is adopted, which abandons the traditional fast heating method. There will be no situation where it is hot near the heating element and not hot elsewhere. The way of circulating heating ensures that the water is heated evenly, which also makes the heating more efficient.

The winding frame design and hidden drain pipe of this foot bath makes you more easy to collect the wires and drain pipe,you will never feel messy again.

The bottom of the foot bath massage component is a drainage system, and the drainage port is designed at the lower position of the fuselage, the water can be drain out more thorough.

Notes for use:
1. Before use, it is required to add a proper amount of water into the foot bath before powering on. It is prohibited to power on when there is no water, otherwise the machine will be damaged due to dry burning

2. Do not add water beyond the highest water level inside the body to prevent overflow at the foot bath drain

3. Do not add high temperature hot water. The water temperature in the bucket reaches 50 ° C or above. To prevent scalding, the whole machine is in forced standby mode, and the screen displays error code E1. If it needs to be used again, unplug the power cord plug again after the water temperature reaches the safe temperature of 50 ° C, and then use it after plugging in the power

4. One button start and intelligent sterilization can not be used together, but can be sterilized first and then soaked

5. It is normal to receive water drops and water stains in the machine. The wading products will pass the water inspection test before leaving the factory. Due to the special internal structure, it can not be completely removed after the inspection, so the received machine will have some residual water drops and water stains

6. When the cover is closed during intelligent sterilization, ozone will be generated, forming no dead corner sterilization

7. If solid drugs need to be added during foot bath, please wrap the drugs with gauze and put them into the medicine box for use, so as to prevent drug residues from blocking the filter screen and the internal pipeline of the machine, causing machine failure

8. For patients with diabetes, cardiovascular, cerebrovascular, dermatosis and other diseases, foot soaking is not recommended. If necessary, please follow the doctor’s advice